ICC logo masthead graphic masthead graphic
 
masthead graphic
MembershipProduct StoreCodes & StandardsGovernment RelationsTrainingCertification and TestingConsumer SafetyJobs and Code TalkNewsroom and Events

Inspector  |  Contractor  |  Renewals  |  UST / AST Certification  |  Legacy / State



Certification: Electrical Plans Examiner

Important Note for All Exam Candidates. As of January 1, 2009, all National Certification examinations that reference the National Electrical Code will be updated to the 2008 edition of the NEC.
Exam ID: E3
 
  • 70 multiple-choice questions
  • 3½-hour limit
  • Open book
Sample Examination Questions: The sample questions are provided to give you an idea of the style and format of examination questions. The questions are not intended to represent content, references or questions that will be on the examination. They are not intended nor should they be referenced/used as a study tool for the examination.
1. In an equipment room that houses a 1,000 volt switchboard, what is the MINIMUM ceiling height of the equipment room? Click for Answer
    A. 6 feet
    B. 6 feet, 6 inches
    C. 7 feet, 6 inches
    D. 8 feet
2. Service raceways running under a five inch concrete slab of a building are: Click for Answer
    A. prohibited.
    B. limited to 10 feet in length.
    C. considered to be outside of the building.
    D. required to be in schedule 80 rigid non-metallic conduit.

3. A transformer is permitted to be installed in a suspended ceiling space where it is not readily accessible if the voltage is less than 600 volts and it has a maximum rating of _____ kVA. Click for Answer
    A. 10
    B. 25
    C. 50
    D. 112½
4. What minimum size copper equipment bonding jumper on the supply side is required for 2,000 kcmil copper service entrance conductor? Click for Answer
    A. 2/0
    B. 3/0
    C. 250 kcmil
    D. 2,000 kcmil
5. For emergency system equipment, all of the following are correct code requirements, EXCEPT: Click for Answer
    A. It shall be suitable for the maximum available fault current at the transfer equipment terminals.
    B. It shall have adequate capacity for all loads to be operated simultaneously.
    C. It shall indicate a ground fault by an audible and visual signal where practicable.
    D. It shall be capable of supplying the full load for at least three hours where the emergency power is supplied by a generator.

Return to certification category

 

 

Contact Information

1-888-ICC-SAFE (422-7233), ext.
Certification Examinations
33806
Certification Renewal
33815
MCP Certification Examinations
33806
CBO Examinations
33806
Contractor Examinations
33805
Legacy Examinations
33823
UST/AST Examinations
33823
Special Inspection Examinations
33823



Click for more information

 

 
Home | Membership | ICC Store | Codes & Standards | Government Relations
Training | Certification & Testing | Public Safety | Jobs & Code Talk | Newsroom & Magazine
Contact Us | Privacy Policy | Vision, Mission & Values | Blueprint to the Future
Subsidiaries: ICC Evaluation Service | International Accreditation Service | ICC Foundation
© 2008 International Code Council

 

About ICC ICC Board Site Map Contact Us Help