| |
Number of questions
|
| 01. |
Vapor Recovery Systems
Pre-installation |
9
|
| |
0101. Licenses &
Certification
Obtain required permits, licenses and certifications. |
|
| |
0102. Executive Orders
Comply with CARB Executive Orders. |
|
| |
0103. Manufacturer's
Specifications
Read and following manufacturer's installation specifications. |
|
| |
0104. Vapor Recovery
System Identification
Identify vapor recovery systems and components. |
|
| 02. |
Installation of Below
Grade Vapor Recovery Components |
19
|
| |
201. UST System Layout
Verify site layout for all piping including vent
and vapor piping. |
|
| |
202. Approved Materials
Verify that proper materials are installed. |
|
| |
203. Installation
of Vapor Recovery Components
Install piping and assemble components in accordance
with manufacturer's specifications and Executive
Orders. |
|
| |
204. Overfill Prevention
Verify installation of overfill protection. |
|
| |
205. Secondary Containment
Install secondary containment vapor and vent piping. |
|
| 03. |
Installation of Above
Grade Vapor Recovery Components |
17
|
| |
301. Dispenser and
Dispenser Vapor Piping
Install dispenser and dispenser vapor piping. |
|
| |
302. Vacuum Assist
Systems and Processors
Install vacuum assist systems, vacuum motors, and/or
processor. |
|
| |
303. Hanging hardware
Install hanging hardware. |
|
| |
304. Vent Risers
and Pressure Vacuum Valve
Install vent risers and pressure vacuum valve. |
|
| 04. |
Repair of Vapor Recovery
System Components |
8
|
| |
401. Observation
and Trouble Shooting
Observe the equipment to determine or identify the
source of the problem. |
|
| |
402. Repair Replace
Components
Repair or replace affected components. |
|
| |
403. System lock-out/tag-out
procedures
Follow System lock-out/tag-out procedures when necessary. |
|
| 05. |
Safety |
7
|
| |
501. Leak and Spill
Prevention
Use procedures to prevent spills and releases. |
|
| |
502. Emergency Response
Locate emergency shut-off switch, fire extinguishers,
fire suppression systems and use appropriate emergency
response procedures. |
|
| |
503. Vapor and Sources
of Ignition at Job Site
Identify and remove sources of ignition and maintain
vapors at safe levels. |
|
| |
504. Personal and
Site Safety Equipment
Use necessary equipment such as eye protection,
safety vests, caution tape and other safety equipment. |
|
| |
505. Confined Spaces
Identify and follow safety precautions for confined
spaces. |
|
