| 01. |
Release Detection (Content Area) |
28% |
| |
0101. Single Wall Tank Release Detection (Task)
For single wall tanks, verify correct method of release detection is in place and that all required periodic testing & maintenance is performed at the required frequency. Verify that any leak detection devices and equipment are operational and have third party certification if applicable. |
12% |
|
| |
0102. Single Wall Piping Release Detection (Task)
For single wall piping, verify correct method of release detection is in place and that all required periodic testing & maintenance is performed at the required frequency. Verify that any leak detection devices and equipment are operational and have third party certification if applicable. |
4% |
|
| |
0103. Double Wall Tank Release Detection (Task)
For double wall tanks, verify correct method of release detection is in place and that all required periodic testing & maintenance is performed at the required frequency. Verify that any leak detection devices and equipment are operational and have third party certification if applicable. |
5% |
|
| |
0104. Double Wall Piping Release Detection (Task)
For double wall piping, verify correct method of release detection is in place and that all required periodic testing & maintenance is performed at the required frequency. Verify that any leak detection devices and equipment are operational and have third party certification if applicable. |
7% |
|
| 02. |
Cathodic Protection (Content Area) |
|
10% |
| |
0201. Sacrificial Anode Cathodic Protection (Task)
Verify the sacrificial anode systems are operational and that cathodic protection testing is performed at required intervals. |
3% |
|
| |
0202. Impressed Current Cathodic Protection (Task)
Verify the impressed current systems are operational and that cathodic protection testing is performed at required intervals. |
7% |
|
| 03. |
Aboveground Storage Tanks (Content Area) |
8% |
| |
0301. Aboveground Storage Tank Operation (Task)
Verify that the operation of aboveground storage tanks complies with state rules and laws. |
8% |
|
| 04. |
Corrective Action Account & Financial Responsibility Account |
13% |
| |
0401. Statutory Responsibilities (Task)
Verify that the UST System Operator take appropriate action to comply with Article 14, Wyoming Environmental Act. |
13% |
|
| 05. |
Overfill Prevention, Spill Prevention, and Release Reporting |
13% |
| |
0501. Overfill and Spill Prevention (Task)
Take appropriate action to prevent overfills and spills |
8% |
|
| |
0502. Release Reporting (Task)
Report releases according to state laws and rules |
5% |
|
| 06. |
General Operating Requirements |
28% |
| |
0601. Inspections and Emergency Equipment (Task)
Verify that sumps and spill containment boxes are inspected for accumulation of liquid and debris. Inspect hardware such as nozzles, breakaway couplings, hoses and impact valves. Verify emergency equipment shut-off, fire extinguishers & fire suppression systems & alarm pull boxes in place & operational. |
8% |
|
| |
0602. Good Housekeeping and Employee Training (Task)
Determine the proper action to take to clean up and handle product spills, overflow from a tank or customer container or remove water from tank systems. Provide annual training of facility employees. |
8% |
|
| |
0603. Tanks, Piping, Containment and Monitoring Systems (Task)
Determine type, size, material and contents of tank. Determine the type, placement and operation of monitoring systems. Determine piping, type and material, pressure / suction piping. Determine if the UST system has secondary containment. |
8% |
|
| |
0604. Fuel Tax Licensing (Task)
Identify what type of license is required |
4% |
|
