| Page |
Page |
| 1-20 |
Sec. 216. In
Division 7, first sentence, revise "Table 3-E"
to "Table 8001.15-B."
|
| 1-75 |
Sec. 3505.2. Revise
first sentence as follows:
|
| |
3205.2 Location and
Parking. Temporary membrane structures, Ttents
and canopies shall not be located within 20 feet
(6096 mm) of property lines, buildings, temporary membrane
structures, other tents and canopies, parked vehicles
or internal combustion engines.
|
| 1-146 |
Sec. 7503.1.3.7.
Revise the test pressure for hydraulic testing from
"15 percent" to "150 percent."
|
| 1-172 |
Sec. 7902.1.14.4.
Revise the reference in Exception 1 from "UFC
Appendix Standard A-II-F-1" to "UFC Standard
79-7."
|
| 1-174 |
Sec. 7902.2.6.4.2.
In the formula for CFH, revise "1.667"
to "1,667."
|
| 1-187 |
Table 7902.5-H. Under
the main title "Ceiling Sprinkler Design and Demand"
and under subtitle "High Temp. Sprinklers"
for the row dealing with Class I and II liquids, delete
reference to Footnote 2.
|
| 1-192 |
Sec. 7903.3.2. Revise
as follows:
|
| |
7903.3.2 Spill control
and drainage control secondary containment.
Outside dispensing areas shall be provided with
spill control and drainage control
secondary containment as set forth in Section
7901.8.
|
| 1-197 |
Sec. 7904.4.8. Revise
as follows:
|
| |
7904.4.8 Drainage
Control. Spill control and secondary containment.
Loading and unloading areas shall be provided with drainage
control spill control and secondary containment
in accordance with Section 7901.8.
|
| 1-197 |
Sec. 7904.5.1.3.
Revise as follows:
|
| |
Spill control and
drainage control secondary containment.
Areas where tank vehicle and tank car loading racks
are located shall be provided with spill control and
drainage control secondary containment
as set forth in Section 7901.8.
|
| 1-202 |
Sec. 8001.4.3.3.
Revise the exception to Item 2 as follows:
EXCEPTION: Piping
and tubing within the space defined by the walls of
corridors and floor or roof above or in concealed space
in above other occupancies when
installed in accordance with the Building Code as required
for Group H, Division 6 Occupancies. See UBC Section
307.11.6.2.
|
1-206,
1-207
and 1-208 |
Sections 8001.15.2.2.2.1,
8001.15.2.2.3, 8001.15.2.2.4, 8001.15.2.3.2.1, 8001.15.2.3.3,
8001.15.2.3.4.2, 8001.15.2.4.2.1, 8001.15.2.4.3, 8001.15.2.4.4,
8001.15.2.5.2.1, 8001.15.2.5.3, 8001.15.2.5.4, 8001.15.2.7.2.1,
8001.15.2.7.3 and 8001.15.2.7.4. Revise the section
reference in the exception from "8001.3.2"
to "8001.10.6."
|
| 1-207 |
Sec. 8001.15.2.5.2.2.
Delete.
|
| 1-211 |
Table 8001.15-B.
Add the reference to Footnote 6 in Item 4, "Irritants,"
under "UseClosed Systems" for "Gas."
|
| 1-226 |
Sec. 8004.1.1. Delete
Exception 2.
|
| 1-228 |
Sec. 8004.3.1.1.
Delete exception.
|
| 1-262 |
Sec. 9003. Add
the following recognized Standards to c.1:
c.1.3. Pressure Relief Device StandardsPart 1
Cylinders for Compressed Gases (8th Edition, 1994)
c.1.4. Pressure Relief Device StandardsPart 2
Cargo and Portable Tanks for Compressed Gases (6th Edition,
1995)
c.1.5. Pressure Relief Device StandardsPart 3
Stationary Storage Containers for Compressed Gases (5th
Edition, 1995)
|
| 1-285 and 1-286 |
Appendix II-E, Figure
A-II-E-1, Sample Format. Delete Items 8, 10 and
11 from Section II, subsection 2.2, Inventory Statement
Instructions, and renumber accordingly.
|
| 1-287 |
Appendix II-E, Figure
A-II-E-1, Sample Format. Delete columns 8, 10 and
11 from the table to Section II, Hazardous Materials Inventory
Statement, Part B, and renumber accordingly. |