Preparing for Disasters: Build Strong, Build Smart

WEEK ONE // May 1-5, 2019

Natural disasters are increasing in severity and frequency. Planning in advance for devastating events like hurricanes, tornadoes, wildfires and earthquakes helps individuals and communities increase the health and safety of their population during a disaster, protects the local tax base, ensures continuity of essential services, and supports a faster recovery in the aftermath of a disaster. Here’s how you can help your family and community:

  • Build to Code
  • Prepare your family
  • Protect your home
  • Benchmark Your Community’s Resilience

Build to Code

One of the best ways for communities to prepare for disasters is to build to the most up-to-date, modern building codes. Disaster mitigation through the adoption and enforcement of building codes provide you, your family and your community protection in the event of a natural disaster.

The National Institute of Building Sciences found that adopting the 2018 International Codes (I-Codes) generates a national benefit of $11 for every $1 invested. The I-Codes, developed by the International Code Council, are a family of fifteen coordinated, modern building safety codes used in all 50 U.S. states and in many other countries that protect against disasters like fires, weather-related events and structural collapse.

The development and widespread adoption of building codes creates a uniform regulatory environment in which design professionals and contractors are held to a set of standards adopted by and applicable to the jurisdiction in which they work. . The Rebuilding of London Act of 1666, after the Great Fire of London that same year, was the first building code of the modern era. Building regulation in the United States began in the late 1800s when major cities began to adopt and enforce building codes, also in response to large fires in densely populated urban areasOver time, the scope of building codes broadened. Today, building codes address structural integrity, lighting, ventilation, safe egress, construction materials as well as fire resistance. They specify the minimum requirements to safeguard the health, safety and general welfare of building occupants.

To learn more about building codes, check out  the Code Council's Introduction to Building Codes, Building Codes: How They Help You , Benefits of Building Permits and FEMAs Building Codes Toolkit.

[Back to the top]

Prepare Your Family

Making sure your family is prepared for any natural disaster is important. Below are some of the steps you can take to prepare your family and protect your home from natural disasters. Your actions can ensure that no matter what Mother Nature brings, you, your family and your community will be resilient.

Help is available from code officials post-disaster. Inter-local agreements, mutual aid agreements and state-to-state agreements through the Emergency Management Assistance Compact (EMAC) are providing help with building inspections when needed. The Code Council and the National Council of Structural Engineers Associations (NCSEA) have joined forces to create the Disaster Response Network, a national, digital database of volunteers to assist local, state or federal entities who need skilled, trained and certified building safety professionals in the aftermath of a disaster.

Below are some resources the Code Council has to help you prepare your family and protect your home from natural disasters.

Brochure: Safety First-Disaster Preparedness: Tips for Your Home and Family

10 Disaster Safety and Mitigation Tips-Flyer

10 Fire Safety and Awareness Tips-Flyer

Here are a few tips to follow from the Federal Alliance for Safe Homes (FLASH) when preparing your family for any emergency.

Develop a family disaster plan that includes a list of food and water supplies needed for each member of your family and supplies for your pets. Make copies of important documents like insurance policies, the deed to your home, and other personal papers, important phone numbers and a home inventory. Create a checklist of important things to do before, during and after a disaster.

Review your evacuation route and emergency shelter locations with your family. Options for evacuation would include staying with friends and relatives, seeking commercial lodging or staying in a mass care facility operated by disaster relief groups in conjunction with local authorities.

Taking shelter is critical in times of disaster. Sheltering in place is appropriate when conditions require that you seek protection in your home, place of employment or other location where you are when disaster strikes.

Consider incorporating a safe room in building plans and improvements.

Review your plan regularly. If you make changes that affect the information in your disaster plan, update it immediately.

Visit FEMA’s PrepareAthon! to learn more about how to prepare for earthquakes, floods, hurricanes, tornadoes, wildfires and winter storms. Get Involved to help prepare your family and community.

[Back to the top]

Protect Your Home

The power of natural disasters can be overwhelming. While you can't necessarily stop them from happening, there are steps you can take to increase your home's chance of survival, even in the face of the worst that Mother Nature can dish out.

Flood insurance can be the difference between recovering and being financially devastated. Just one inch of water in a home can cost more than $25,000 in damages. The average flood insurance claims payment to homeowners was about $90,000 from the Baton Rouge floods in 2016 and $65,000 for Superstorm Sandy that struck the Northeast in 2012. FEMA's Individual Assistance Program can provide financial assistance for home repairs, rental assistance, and other needs, but the average payouts are much smaller, on the order of $6,000 to $8,000 per household — why risk it?

Our ICC's Pulse Podcast: Episode 3, featured two guests from the Federal Insurance and Mitigation Administration (FIMA) and FEMA to discuss Pre-disaster Mitigation.

 

[Back to the top]

Benchmark Your Community’s Resilience

There are important measures that can be taken at a community-level to reduce the impacts of disasters. Benchmarks allow a community to identify how resilient they currently are and the steps they can take to improve.

The International Code Council and the Alliance for National and Community Resilience (ANCR) are working on developing community resilience benchmarks across all community functions. They released their first benchmark covering buildings. This pilot document consists of nine requirements aimed at increasing the resilience of our communities, including the adoption, administration and enforcement of building codes. In particular, the benchmark encourages local governments to adopt building codes and to provide the human, technical and financial resources necessary to support permitting, plan review and inspections. Buildings house many of the most critical functions of our communities, including schools, hospitals, businesses and residences. These benchmarks are especially critical in providing community leaders the necessary tools to create safer and more resilient structures.

Throughout 2019, ANCR will engage subject matter experts in the development of additional benchmarks including housing, business, energy and water infrastructure.

[Back to the top]

Additional Information and Resources

Earthquake Safety 

Flood Safety and Recovery 

Brochure: Flood Cleanup: Safety & Salvaging

Reducing Flood Losses through the International Codes: Coordinating Building Codes and Floodplain Management Regulations 

Building in Higher Flood Zones: Freeboard – Reduce Your Risk, Reduce Your Premium

What is Freeboard? Raise your home, Lower your monthly payment

Hurricane Safety

Tornadoes and High Wind Safety

Wildfire Information

Winter Weather Safety

Role-playing game: Is Your Community Ready for an Extreme Event?

May 1-5, 2019
Building Safety Month: Week One

May 6-12, 2019
Building Safety Month 2019: Week Two

 

May 13-19, 2019
Building Safety Month: Week Three

May 20-26, 2019
Building Safety Month: Week Four

May 27-31, 2019
Building Safety Month: Week Five