March 7, 2001
NEW Acousti-Mat? 3 is the sound deadening solution for floor systems that have been impossible to control! Now you can put an end to those "noise" complaints - even with open beam, concrete slab and conventional wood frame systems. Acousti-Mat? 3 consists of a nylon core of fused, entangled filaments attached to a non-woven fabric, similar to Maxxon''s Acousti-Mat II , only three times thicker. It''s a proven fact that the larger the air space, the greater the sound control - and this system creates the largest air void of any sound control mat. The results - up to an additional 5 db improvement in impact noise control, over the already high sound control provided by Acousti-Mat II . This is a 15 IIC (impact noise) rating point improvement over a conventional wood frame construction! And 10 points represents a doubling of performance and would sound twice as good to the human ear. The additional mass of the floor system also increases the STC (airborne noise) rating. [URL=http://www.maxxon.com/product_detail.asp?ID=10]http://www.maxxon.com/product_detail.asp?ID=10[/URL]
Most Recent Topics
- Electric Hot Water Heaters in Garages
- Ceiling fans on 20 amp circuit?
- Glad I found this forum!
- Nice to Meeting you All.
- WhatWhat year of the UBC or IRC changed the requirement for 48" window sill height for egress to 44"?
- horizontal wet vent
- Corridor smoke management
- Salon West Palm Beach
- 220 dryer receptacle elevation?
- two part tests