ICC

Deep Foundations - Overview and Design Example
2024-01-23 11:00 - 13:00 (America/Los_Angeles) | Webinar, Webinar, United States
Deep foundation systems provide improved resistance to settlement and can safely support buildings founded on very poor soils. Deep foundations can also improve building performance by providing resistance to uplift loading. The design of deep foundations involves both the Geotechnical Engineer and the Structural Engineer. Thus, it is wise for the structural engineer to become more educated regarding deep foundation design. This presentation will provide an overview of deep foundations, including various systems in common use, such as driven precast concrete and structural steel piles, augercast piles, cast-in-drilled-hole piles, and micropiles. Mr. Harris will discuss the behavior of each system, as well as its best uses and limitations. The presentation will also include a worked example design for cast-in-place concrete piles resisting vertical and lateral loads.

Frame of Reference: Steel Moment Frames Explained
2024-01-25 11:00 - 13:00 (America/Los_Angeles) | Webinar, Webinar, United States
This web seminar will discuss the structural design and detailing requirements for ordinary and special steel moment frames specified under the provisions of the 2018 IBC, ASCE 7-16, AISC 360-16, and AISC 341. Intermediate steel moment frames will only be addressed by explaining why they are not commonly used. The following topics will be presented:

Seismic detailing requirements for steel moment frames that are commonly overlooked
Examples illustrating the mixing of steel moment resisting frames with wood lateral-force resisting systems and compliance with seismic detailing requirements, even when wind load governs
Performance of past design leading up to current design philosophy for steel moment frames
Comparisons of design and detailing requirements for various steel moment frame systems
Background on the exceptions for increased height of ordinary steel moment frames
Challenges when using steel moment frames in wood construction
Helpful reference documents for practicing engineers

Why is Pipe Sizing Important?
2024-03-04 12:30 (America/Chicago)
This Learn Live event will be a hybrid presentation on the history of plumbing, the various methods of pipe sizing for supply, drain & vent systems, a brief summary of the research aspect and the development of ICC 815 Standard for Sizing Water Distribution, Sanitary Drainage and Vent Piping Systems.
12:30 p.m. EST
Learning Objectives:
History of Pipe Sizing
Factors Driving the Need for Pipe Sizing
Unintended Consequences of Modern Flow Rates
Current Pipe Sizing Methods
Intro to ICC 815 Standard
Speakers: Ramiro Mata and Lisa Reiheld (ICC-PMG Hosts), Panelists: John Lansing (Plumbing Design Engineer), Gary Klein (815 Chair), Esber Andiroglu (University of Miami).
Registration Link: https://shop.iccsafe.org/why-is-pipe-sizing-important-with-an-extended-panel-discussion-online-live.html

Structural Design Considerations for Blast Loading
2024-03-05 11:00 - 13:00 (America/Los_Angeles) | Webinar, Webinar, United States
Structures are subjected to a wide range of loads during their service life. In the past several decades, blast loading on high-profile and critical infrastructure has become an important design consideration. This seminar will introduce the fundamentals of blast loading (intentional and accidental) and subsequent structural response and façade design requirements.
Learning Objectives:

Understand the development of blast loading (intentional and accidental).
Learn about the treatment of blast effects as a structural load.
Understand the importance of non-structural blast-resistance design.
Learn about the potential benefits of utilizing resilience-based blast design on projects.

Tall Mass Timber Building and the 2021 IBC (Online Live)
2024-03-06 09:00 - 16:00 (America/Chicago)
The 2021 International Building Code allows for construction of tall mass timber buildings with larger heights and areas than previously permitted in Types III, IV, and V construction. This course will provide an overview of mass timber which includes any product currently permitted for use in Type IV (heavy timber) construction such as cross-laminated timber (CLT), structural composite lumber (SCL), glued laminated timber (glulam), mechanically laminated decking (aka nail-laminated timber, NLT), and large section sawn timbers. Learn about provisions first introduced in the 2015 and 2018 IBC for mass timber construction as well as an overview of tall mass timber construction per the 2021 IBC and 2021 International Fire Code. Research and development conducted in support of new tall mass timber Construction Types IV-A, IV-B and IV-C in the 2021 IBC will also be discussed. Topics include: heights and areas, fire safety, fire and connection design, construction fire safety, special inspection, energy, acoustics and lateral design provisions.
The following publications are included/recommended to ensure success in the course:
• PDF Download Included – Mass Timber and the 2021 IBC®
• Recommended – 2021 International Building Code® (IBC®)
• Recommended – 2021 International Fire Code® (IFC®)
9:00 a.m.

2021 IECC Update - Residential Provisions (1 Hour Online Live)
2024-03-06 12:00 - 13:00 (America/Chicago)
This class reviews those key changes from the 2018 to the 2021 edition of the International Energy Conservation Code (IECC). The discussion will address changes to the residential provisions of the IECC.
The following publication is recommended to ensure success in the course:
• Recommended – 2021 International Energy Conservation Code®(IECC®)
Price: $49
Member Price: $39
12:00 p.m. CT

2021 IFC Significant Changes (Online Live)
2024-03-12 09:00 - 16:00 (America/Chicago)
The Significant Changes to the International Fire Code® 2021 Edition class is to familiarize fire officials, building officials, plans examiners, fire inspectors, design professionals, and others with the many important changes in the 2021 International Fire Code® (IFC®). This class will assist code users in identifying the specific code changes that have occurred and, more important, assist them in understanding the reasoning behind the changes. It is also a valuable resource for jurisdictions in their code-adoption process. This class provides an overview of critical concepts included in the Significant Changes to the International Fire Code® 2021 Edition. The participants will learn the correct use of the code’s requirements in the design, plan review, inspection and analysis of projects. They will apply the code in clear-cut situations and build their understanding of the intent of the code when asked to make compliance decisions.
The following publications are included/recommended to ensure success in the course:
• PDF Download Included – Significant Changes to the International Fire Code® 2021 Edition(IFC®)
• Recommended – 2021 International Fire Code® (IFC®)
Price: $ 198
Member Price: $165
9:00 a.m. CT

Webinar: Global Pipe-Sizing Collaboration
2024-03-12 16:00 (America/Chicago)
This ICC Learn Live event will feature speakers from Australia, Germany, New Zealand and the United States who participate on the ICC 815 committee. Each speaker will provide an overview of the different pipe-sizing methods and the research undertaken in their regions which is being used to inform ICC 815 Standard for Sizing Water Distribution, Sanitary Drainage and Vent Piping Systems.
Speakers: Tom Roberts (ICC-PMG Host)
Panelists: Tom Wise (Australia), Gary Klein (USA), Frank Schmidt (Germany) and Ross Wakefield (New Zealand).
4:00 p.m. ET
Register here.

Legal Aspects of Code Administration (Online Live)
2024-03-13 09:00 - 16:00 (America/Chicago)
Provides code officials with guidelines for administering the legal aspects of codes with regard to enforcement, prosecution and maintenance. In this course participants will discuss historical consequences of ignoring the regulation of building construction and materials, and learn how to interpret and applying local government, state and federal legislative laws, pertaining to the administration and enforcement of a building code. Participants will also be able to define and apply concepts which are legally important to the administration and enforcement of a building code and establish or document rules of procedure used before a board of building code appeals. By using the guidelines presented in the course, participants will learn how to effectively testify in a court of law.
The following publications are included to ensure success in the course:
• PDF Download Included – Legal Aspects of Code Administration
Price: $198
Member Price: $165
9:00 a.m. CT

Wind Loads on Open Projecting Attached Porches
2024-03-13 11:00 - 13:00 (America/Los_Angeles) | Webinar, Webinar, United States
This webinar will explore application of uplift and shear loads on gable-, hip- and shed-type porches for main wind-force resisting system (MWFRS) wind loads parallel and perpendicular to a building face. It will also include assessment of component and cladding (C&C) uplift loads for rafters, sheathing and sheathing attachment. Inset or partially inset porches are not evaluated nor are roof lines extending as an overhang over the porch. ASCE 7-16 wind load provisions will be evaluated including selection of applicable pressure coefficients. Prescriptive solutions for uplift and lateral loads will be presented. A draft document outlining this methodology and assumptions is being developed and peer review is welcome.

BMC Governing Committee Meeting
2024-03-13 15:00 - 16:30 (America/New_York)
The ICC BMC Governing Committee will meet on this day and time.

2021 IBC Accessibility and Usability for Commercial and Residential (Online Live)
2024-03-18 09:00 - 16:00 (America/Chicago)
This seminar focuses on the minimum requirements for new or existing construction of accessible residential facilities for compliance with the 2021 International Building Code® (IBC®) and ICC A117.1-2009 Accessible and Usable Buildings and Facilities. It addresses the design, plan review and inspection of residential buildings and facilities to ensure that people with physical impairments, visual impairments and hearing impairments can use the facilities. Attendees will participate in activities that involve questions and answers, discussion and case study, performing parts of individually and in groups.
Price:$198
Member Price: $165
9:00 a.m. CT

2021 Permit Technician Institute (Online Live)
2024-03-19 09:00 - 2024-03-20 16:00 (America/Chicago)
This Institute provides the permit technician with the knowledge, skills and abilities needed to perform their jobs in code administration: legal aspects, code language, code enforcement, reading construction documents, performing plan reviews and the permitting and inspection process. Participants will become familiarized with the International Building Code® (IBC®) and the International Residential Code® (IRC®) and sharpen customer relations skills. This Institute is designed to familiarize and assist permit technicians in locating, describing and applying concepts from the books Basic Code Enforcement.2021 International Building Code® (IBC®), 2021 International Zoning Code® (IZC®) and Legal Aspects of Code Enforcement. The following publications are included/recommended to ensure success in the course:
PDF Download Included – Basic Code Enforcement
PDF Download Included – 2021 Permit Technician Study Companion
Recommended – Legal Aspects of Code Administration
Recommended – 2021 International Residential Code®(IRC®)
Recommended – 2021 International Building Code®(IBC®)
Recommended – 2021 International Zoning Code® (IZC®)
Price: $565
Member Price: $470
9:00 a.m. CT

Hand Calculations for the Design of Stud Rails
2024-03-20 11:00 - 13:30 (America/Los_Angeles) | Webinar, Webinar, United States
The webinar will show the hand calculations for the design of stud rails to resist punching shear in compliance with the ACI code and the stud rails ESR/ICC report. Common mistakes will be discussed. Understanding the limits of stud rails and proper detailing will be shown.

Balcony Sprinklers in the Codes versus NFPA 13, NFPA 13R, and NFPA 13D (Online Live)
2024-03-20 12:00 - 17:00 (America/Chicago)
Extending fire sprinkler systems to protect balconies of residential buildings can provide exposure protection, tradeoffs, and life safety. However, not all codes, such as the International Building Code and International Residential Code for residential buildings have the same requirements for balcony sprinklers. NFPA 13, NFPA 13R, and NFPA 13D differ on how balcony protection, if required, are applied to residential and other occupancy balconies. As more mixed-use buildings and mixed-sprinkler standards are being applied, this seminar looks across the model codes and installation standards to provide clarity to the subject. This seminar is important for the fire sprinkler industry, architectural community, and for code officials with the short history of balcony sprinklers, detailed discussion, and updates in the 2021 model codes as well as the 2022 NFPA sprinkler standards.
Price: $49.00
Member Price: $39.00
12:00 p.m. CT

New Seismic Design Provisions for One-Story Structures with Flexible Diaphragms and Rigid Vertical Elements
2024-03-21 11:00 - 13:00 (America/Los_Angeles) | Webinar, Webinar, United States
It has long been recognized that the seismic response of one-story tilt-up concrete wall buildings (and similar buildings with flexible diaphragms and rigid vertical elements) is controlled by the flexible diaphragm much more than the rigid vertical elements. Widely used seismic design provisions have not recognized or incorporated this behavior, however. Now, new seismic design provisions recently developed for ASCE 7-22 explicitly recognize this response behavior, drawing from extensive numerical studies published in the guideline document Seismic Design of Rigid Wall-Flexible Diaphragm Buildings: An Alternate Procedure (FEMA P-1026) and supplemental studies of bare steel deck diaphragms. In fact, the new design provisions go a step further to introduce a zone of reduced shear demand that improves seismic performance by allowing distributed yielding away from the diaphragm perimeter. This webinar will first present the concepts behind the new seismic design provisions, and the numerical studies addressed in FEMA P-1026 and supplemental bare steel deck diaphragm studies. A design example will then be presented, along with design and detailing tips and recommendations for practicing engineers.

Report Writing Basics (Online Live)
2024-03-27 12:00 (America/Chicago)
Effective writing is vital to your career as an inspector, notices of violation, letters and reports are public documents that may be read by supervisors, attorneys, judges, citizens, design professionals, contractors and reporters. This presentation provides an overview of the knowledge and skills needed for effectively writing reports and violation notices for code professionals of all levels. Participants will learn the importance of writing a good report, writing professional sentences and choosing the correct terminology to use. Through examples and practice opportunities, participants will become more skilled at writing and editing their work.
Price: $49
Member Price: $39
12:00 p.m. CT

Webinar: Increasing Sustainability and Community Resilience Through Water Reuse
2024-03-27 13:00 (America/Chicago)
This ICC Learn Live event will explore water reuse in the built environment. Industry experts and Code Council partners such as the EPA, National Blue-Ribbon Commission and manufacturers of onsite water reuse systems will present on behalf of their organizations and the PMG Code Action Committee (CAC) Water Reuse Working Group. Attendees will learn and gain insight into industry innovations and a preview of the PMG CAC Water Reuse proposals for the 2027 International Plumbing Code® and International Residential Code®.
NBRC efforts to bring water reuse as a viable option for sustainability and conservation.
EPA’s Water Reuse Action Plan (WRAP), precisely action 2.18.
WateReuse trade association updates on laws, policy, funding, and public acceptance of recycled water.
PMG CAC Water Reuse working group’s effort to expand onsite water reuse in the built environment.
Speaker: Rich Anderson (ICC-PMG Host)
Panelists: Paula Kehoe, NBRC; Sharron Nappier, EPA; Pat Sinicropi, WateReuse; Adam Stern, Natural Systems Utilities and PMG CAC Water Reuse working group; Rich Anderson, ICC (host).
1:00 p.m. ET
Register here.

2021 IECC Update - Commercial Provisions (Online Live)
2024-04-03 12:00 - 17:00 (America/Chicago)
This seminar covers the significant changes to the commercial provisions of the 2021 International Energy Conservation Code® (IECC®)
Objectives:

Identify the importance of the energy code in reducing building energy use and providing other environmental benefits​
Explain the intent, scope and applicability of the 2021 IECC requirements for commercial building projects​
Identify the most significant administrative changes to the 2021 IECC and changes that increase the useability of the code​
Identify the most significant energy efficiency changes in the 2021 IECC commercial provisions and potential impact on the design, plan review and inspection communities​

Price: $59.00
Member Price: $49.00
12:00 p.m. CT

2021 IECC Essentials (Online Live)
2024-04-04 09:00 - 17:00 (America/Chicago)
Participants will apply the critical concepts of the 2021 International Energy Conservation Code. These concepts provide a basis for the correct use of the code in the design, plan review, inspection, and analysis of projects. It will provide a clear understanding and correct use of the requirements identified by these basic code provisions, tables and categorizations. Participants will apply the code in clear-cut situations and build their understanding of the intent of the code when asked to make code compliance decisions. Participants will be to apply the 2021 International Energy Conservation Code to increase the efficient use of energy in the construction of new buildings and alterations to existing buildings.
The following publications are included/recommended to ensure success in the course:

• PDF Download Included – Energy Code Essentials, Based on the 2021 IECC®
• Recommended – 2021 International Energy Conservation Code® (IECC®)

Price: $198.00
Member Price: $165.00

9:00 a.m CT

2022 Changes to AISC 341 and 360
2024-04-04 11:00 - 13:00 (America/Chicago)
The 2022 editions of AISC Specification for Structural Steel Buildings (ANSI/AISC 360-22) and the Seismic Provisions for Structural Steel Buildings (ANSI/AISC 341-22) represent the latest in structural steel design and construction. This presentation will cover the latest updates, including the exciting addition of concrete-filled coupled composite plate shear walls to both standards. Other major additions to the Specification include clarification on what to include in structural design documents; a new appendix on filled high-strength composite members; and a major expansion of the appendix on structural design for fire conditions. The Seismic Provisions now include an appendix on nonlinear response history analysis. These and many more developments will be discussed to orient users on how to start incorporating these latest standards into their practice.
Register here.
11:00 a.m. – 1:00 p.m. PT

Eastern States Building Officials Federation 75th Annual Educational Conference
2024-04-08 08:00 - 2024-04-09 17:00 (America/New_York) | AC Hotel Portsmouth Downtown/Waterfront, 299 Vaughan Street, Portsmouth, NH, 03801, United States
Trainings Include:
Residential Building Inspector Test Academy – John Gibson ICC Instructor (Monday and Tuesday, Full Day (16 Hours) – In Person Only
The 2021 B1 Exam Prep is designed to assist you with taking the B1 Certification Exam. The test academy will cover in detail the topics of the exam. Throughout the academy you will be given an opportunity to answer questions that reference the exam resources. The topics that will be covered: code administration; building planning; footings and foundation; floor construction; wall construction and coverings; roof/ceiling construction and public safety and special construction of the residential building inspector certification exam.
Fire and Building Official Track – Rob Neale, ICC Instructor
Monday: Full Day – For Building Officials – Fire and Life Safety Systems in the I-Codes
This course guides users through the International Building Code® (IBC®) for fire protection systems (Chapter 9), including suppression, standpipe, automatic fire alarm and other detection systems and additional fire protection assemblies.
Tuesday: Two Half Day Courses – AM West, Texas: Could Codes Have Made a Difference? PM – Why Codes Matter to Fire Investigators
Code Enforcement Track — Marcus Kellum, MetricOne
Monday: Two Half Day Courses – Supporting your education for the Certified Building Official Exam AM – Legal Aspects of Code Administration PM – Effective Local Government Management
Tuesday: Two Half Day Courses – For Managers and Policy Makers AM – Reclaiming Your Relevancy PM – The Intangibles of Regulatory Enforcement

Shear Friction Dowel Design for Concrete Diaphragms
2024-04-10 11:00 - 13:30 (America/Chicago)
This webinar will focus on the misconception of the design of the slab to shear wall connection, specifically how the joint rebar is required to transfer all the diaphragm force at the level in question and the shear from the upper floors. It will address the shear friction connection from the shear wall to the foundation. Most engineers we review do not add rebar at the construction joint and use the vertical wall rebar for shear transfer (by default) and flexural resistance, which occur at the same time. They rarely perform the required design or acknowledge the two simultaneous forces. The webinar will also discuss that a “dowel” must cross the construction joint. Rebar in the slab, that does not cross between the wall and slab does not provide shear friction. This is a common detailing mistake.
Register here.
11:00 a.m. – 1:30 p.m. PT

2021 IRC Essentials (Online Live)
2024-04-16 09:00 - 17:00 (America/Chicago)
This class examines basic concepts of the 2021 International Residential Code® (IRC®). These concepts provide a basis for the correct utilization of the code. A clear understanding of the identified requirements allows the code user to apply the IRC in specific situations and helps to build an understanding of the intent of the code when asked to make a judgment on code compliance. This course will also help the code user to correctly locate code requirements. It will also provide a basis for the correct use and application of the code as well as to begin to develop a procedure for applying them.
The following publications are included/recommended to ensure success in the course:

• PDF Download Included – Residential Code Essentials, 2021 Edition® 2021 Edition(IRC®)
• Recommended – 2021 International Residential Code® (IRC®)

Price: $198.00
Member Price: $165.00
9:00 a.m. CT

Effective Design of Buckling Restrained Braced Frames
2024-04-16 11:00 - 13:00 (America/Chicago)
Buckling restrained braced frames are a valuable tool in providing good seismic performance. The system has gained popularity in many applications, including in areas of moderate and even low seismicity, due to the highly controlled and predictable behavior, and the correspondingly straight-forward design methods required for the system. This presentation will cover the behavior of the system, the design requirements, considerations for effective design (including coordination with brace manufacturers), and innovative applications.
Register here.
11:00 a.m.- 1:00 p.m. PT

Mat Foundation Design
2024-04-18 11:00 - 13:00 (America/Chicago)
During this seminar, Ian McFarlane will discuss design of mat foundations and soil-structure interaction. The session will describe the uses of mat foundations, historical perspectives that have led to the current procedures, and discuss soil properties and soil-structure interaction. Guidance will be provided for proportioning, analysis, and design for mat foundations. Code requirements and accepted approaches to their implementation will also be addressed, with additional discussion on best practices that go beyond code minimum requirements. Finally, detailing and constructability tips will be presented. The scope of this session will include design of mat foundations for both non-seismic and high-seismic conditions.
Register here.
11:00 a.m. – 1:00 p.m. Pt

2021 Property Maintenance and Housing Inspector 64 Certification Test Academy (Live in Person)
2024-04-22 09:00 - 2024-04-24 16:00 (America/Chicago)
The 64 – Property Maintenance and Housing Inspector Certification Test Academy features expert instruction and includes interactive review exercises, practice exams and individual and group-based activities to help you get better prepared to take the exam. Throughout the academy you will be given an opportunity to answer questions that reference the exam resources. Main Topics include: Administration and Legal, Light, Ventilation and Occupancy, Fire and Life Safety, Mechanical, Plumbing, Electrical and Property Conditions. The goal of the test academy is to familiarize you with the property maintenance and housing inspector certification exam content and references.
The exam is open book and candidates may use references during the exam. It is mandatory that each participant have the references noted as Required for the training.
Required – 2021 International Residential Code® (IRC®)
Required – 2021 International Property Maintenance Code® (IPMC®)
Required – Legal Aspects of Code Administration, 2017 Edition
Price: $1,195
Member Price: $995
9:00 a.m. CT

Real World Examples to Provide Fire Rated Assemblies Using Approved Methods
2024-04-24 11:00 - 13:00 (America/Chicago)
The presentation will cover basic examples for providing fire rated assemblies such as walls, columns, beams and floors/roofs, for new building construction. The examples are for demonstrating compliance with the fire resistance requirements of the 2018 International Building Code. Course material presented will cover using code recognized technical resources and methods to document compliance.
LEARNING OBJECTIVES:
Participants will be given instruction on the use of the approved methods recognized in Chapter 7 of the IBC for meeting the required fire resistances of the building elements.
Participants will gain a working knowledge of the technical resources available to document expected fire resistance of building elements.
Participants will be presented real world examples to determine the fire resistance requirements for key building elements including the structural frame, floors, roofs and exterior walls using the approved methods.
Register here.
11:00 a.m. – 1:00 p.m. PT

Common Structural Issues Observed in Plan Check
2024-04-30 11:00 - 13:00 (America/Chicago)
This webinar will cover common structural challenges faced during plan review. Issues related to coordination between various design professionals, plan revisions required midway through the approval process that may impact the structural systems, Incomplete design considerations deign consideration and or improper use of building material or components. The webinar will include discussion on the impact on the structural system when there is a change of use and occupancy and when alterations are proposed to an existing building.
Register here.
11:00 a.m. – 1:00 p.m.

2021 IRC Wood Wall Bracing (Online Live)
2024-05-01 09:00 - 17:00 (America/Chicago)
This class provides a comprehensive explanation of the 2021 International Residential Code® (IRC®) Wood Wall bracing requirements. The seminar will focus on code requirements and application to design while clarifying the application of wall bracing provisions in the IRC wall bracing Sections R602.10 thru R602.12. This is a basic course covering all applicable provisions, an intermediate course specializing in high wind or seismic concerns, or advanced course dealing with gray areas of wall bracing and related requirements for the roof and foundation. Participants will successfully apply the provisions of the 2021 IRC to case studies involving bracing requirements for wood-framed residential structures in their region.
The following publications are included/recommended to ensure success in the course:

PDF Download Included – A Guide to the 2018 IRC® Wood Wall Bracing Provisions + Free Digital 2021 Supplement
Recommended – 2021 International Residential Code® (IRC®)

Price: $198.00
Member Price: $165.00
9:00 a.m. CT
