Welding in Reinforced Concrete Construction
2024-06-19 11:00 - 12:30 (America/Chicago)
While much less common than in structural steel, welding has many applications for steel reinforcement in cast-in-place and precast concrete construction. This webinar will cover welding of steel reinforcement in new and existing concrete construction, provide background on welding process requirements and the development of a PQR (Procedure Qualification Record) and WPS (Welding Procedure Specification), discuss design related requirements in ACI 318 and AWS D1.4, and address construction and special inspection requirements of the IBC.
11:00 a.m. – 12:30 p.m. PT
Learn more and register here.

PART 1 – Design and Detailing Reinforced Concrete Diaphragms
2024-06-25 11:00 - 12:00
Part 1 in this webinar series presents methods on how to determine the required thickness of a diaphragm based on serviceability and strength (in-plane and out-of-plane) requirements. Also presented are step-by-step procedures on how to determine in-plane diaphragm forces due to wind, general structural integrity, seismic, soil, transfer, anchorage, and connection forces based on the requirements of ASCE/SEI 7-22. Methods on how to determine collector design forces for buildings assigned to SDC C through F are also provided.
11:00 a.m. – 12:00 p.m. PT
Learn more and register here.

PART 2 – Design and Detailing Reinforced Concrete Diaphragms
2024-06-27 11:00 - 12:00
Multi Part Series on Design and Detailing Reinforced Concrete Diaphragms
11:00 a.m. – 12:00 p.m. PT
Learn more and register here.

PART 3 - Design and Detailing Reinforced Concrete Diaphragms
2024-07-02 11:00 - 12:00
Part 3 in this webinar series presents comprehensive information on how to determine and detail the required reinforcement for diaphragms and collectors in accordance with ACI 318-19 and ASCE/SEI 7-22 for buildings assigned to SDC A through F. Step-by-step methods are provided on the following types of reinforcement for two common types of construction: (1) chord reinforcement, (2) diaphragm shear reinforcement, (3) shear transfer reinforcement between the diaphragm and the vertical elements of the LFRS, (4) shear transfer reinforcement between the diaphragm and collectors, (5) anchorage reinforcement, and (6) collector reinforcement. Guidelines and recommendations for economical detailing are provided along with a comprehensive summary of design and detailing requirements.
Register here.
11:00 A.M. – 12:00 P.M. PST

PART 4 - Design and Detailing Reinforced Concrete Diaphragms
2024-07-09 11:00 - 12:00
Part 4 in this webinar series presents comprehensive worked-out examples that illustrate the proper application of code requirements for diaphragms in buildings assigned to SDC B through F. Included are many practical design aids and guidelines that make the design and detailing process simpler and faster.
Register here
11:00 A.M. – 12:00 P.M. PST

Elongation Record Review
2024-07-11 11:00 - 13:30
Several post-tension suppliers have provided examples of how engineers are incorrectly understanding using elongation records. The lack of understanding is creating delays at the job site, increased potential for corrosion and underestimating the strand force. Webinar will discuss, the stressing process, measuring, what do the measured elongations actually represent and the reason we have a 7% code tolerance.
Register here.
11:00 A.M. – 1:30 P.M. PST

TMS 402-2022 Masonry Code: Changes and How They Can Help You Today
2024-07-23 11:00 - 13:00
The masonry design standards, TMS 402/602 Building Code Requirements and Specification for Masonry Structures were updated in 2022 following a 6-year revision cycle. Learn the major changes in these standards which include a complete rewriting of the veneer provisions, the introduction of compression-controlled sections in strength design, anchor bolt recalibration to be based on the ultimate strength of steel, and the addition of an appendix on masonry reinforced with GFRP (Glass Fiber Reinforced Polymer) bars. These changes and many more will be discussed, and the impact of the changes on typical designs will be reviewed.
Register here.
11:00 A.M. – 1:00 P.M. PST

Seismic Design of Special Concentrically Braced Frames
2024-07-31 11:00 - 13:30
The design of ductile concentrically braced frames has evolved considerably over the past few revisions of AISC 341. This seminar will present fundamentals on the seismic behavior of concentrically braced frames and the current AISC 341-16 provisions for Special Concentrically Braced Frames that are intended to achieve ductile seismic response. Specific points of emphasis will include the application of capacity-based design principles, braced frame member design, and braced connection behavior and detailing for ductility. An overview of a design example will also be provided.
Register here.
11:00 A.M. – 1:30 P.M. PST

Use of Grade 80 and Grade 100 Reinforcing Bars in ACI 318-19
2024-08-06 11:00 - 12:00
Recent advances, including substantial new research, have enabled reinforcing steels of higher strengths to be a viable option in a variety of applications in reinforced concrete structures. This webinar presents information related to the use of Grade 80 and Grade 100 steel reinforcement in the 2019 edition of ACI 318 Building Code Requirements for Structural Concrete. Numerous revisions have been made in ACI 318-19 to incorporate the use of high-strength reinforcement, and this webinar covers new and updated requirements for the following:

Types of nonprestressed reinforcing bars
Development and splice lengths
Structural members, including two-way slabs, beams, columns, walls, diaphragms, and foundations
Limits on concrete compressive strength
Strength reduction factors

Benefits related to the use of Grade 80 and Grade 100 reinforcing bars are also included.
Industry professionals should find the information in this webinar useful when designing, detailing, and specifying Grade 80 and Grade 100 reinforcing bars in building projects.
Register here.
11:00 A.M. – 12:00 P.M. PT

Performance Based Wind Design - Introduction to ASCE/SEI Prestandard
2024-08-14 11:00 - 13:00
Performance-based design for seismic engineering has been used for buildings in the United States and internationally for many years. Performance-based wind design (PBWD) is a natural extension of the overall PBSD framework.
ASCE/SEI “Prestandard for Performance-Based Wind Design” is published by ASCE/SEI to advance the state-of-art performance-based wind design. PBWD can be used for designing Main Wind Force Resisting System (MWFRS) of the building and/or the envelope of building. Three methods are proposed in ASCE/SEI Prestandard for designing MWFRS using performance-based design approach. The presentation focuses on Method 1.
The potential benefits to PBWD include a more efficient and effective structural design by allowing modest levels of nonlinearity.
The learning objectives are:

Participants will learn how to meet (a) Occupant comfort performance objective (b) Operational performance objective and (c) Continuous occupancy/limited interruption performance objective.
Participants will learn how to implement Method 1 to evaluate continuous occupancy/limited interruption performance objective.
Participants will learn a path to implement PBWD on their projects using IBC provision 104.11 and understand requirements for peer review.

Register here.
11:00 A.M. – 1:00 P.M. PT

Hand Calculations of a Two Way Post-Tensioned Slab
2024-08-20 11:00 - 13:30
This web seminar will provide step-by-step hand calculations for the design of a typical two-way flat slab that is commonly used for a multitude of building applications ranging from parking, hotel, office, and podium type structures. The topics of slab thickness, equivalent loads, flexural stresses, flexural strength, minimum code requirements and punching shear will be addressed. Specific code sections will be discussed in conjunction with construction photographs to highlight the design concepts.
Register here.
11:00 A.M. – 1:30 P.M. PT

A Structural Engineer`s Primer for Probabilistic Seismic Hazard Analysis
2024-08-22 11:00 - 13:30
Probabilistic seismic hazard analysis (PSHA) is the conceptual framework upon which ground motion intensity (i.e., spectral acceleration) is estimated for use in design throughout the United States. It is also used in site specific determination of ground motion for special projects or projects with poor site conditions. Determination of ground motion parameters is the realm of geotechnical engineers, however, structural engineers should have a working understanding of the underpinnings of PSHA to properly interpret both the design ground motion parameters and their structural analysis results. This seminar will provide a background in PSHA designed for structural engineers to develop an understanding of where critical design ground parameters are derived from.
Register here.
11:00 A.M. – 1:30 P.M. PT

How to Get Ahead of Code Enforcement Changes and Resident Requests (Learn Live)
2024-08-22 12:00 - 13:00
In the ever-evolving world of code enforcement, staying on top of constant regulatory changes and managing a flood of resident requests can feel like a never-ending battle. Itï¿½s time to take control and we`ve got your back. Join us for an insightful session where weï¿½ll dive into practical strategies and innovative solutions to help you modernize your processes and regain control.
Register here.
12:00 P.M. – 1:00 P.M. CST

PART 1 - Seismic Design Provisions of ASCE 7-22
2024-08-28 11:00 - 13:00
Part 1: Chapter 11: Seismic Design Criteria
ASCE 7-22 is adopted by the 2024 IBC, which will be published later this year. The changes from ASCE 7-16 to ASCE 7-22 are so numerous and so substantive that learning about them needs to start now. The chapter on flood loads is the only chapter that has escaped any change. There are huge changes in snow load, ice load, and tsunami load provisions. There is a whole new chapter (32) on tornado loads. Risk Category III or IV structures located in the tornado-prone region shown in a figure are required to be designed and constructed to resist the greater of the tornado loads determined in accordance with Chapter 32 or the wind loads determined in accordance with Chapters 26 through 31. The changes in Chapters 11-23 on earthquake loads and Chapters 26-31 on wind loads are many and many of the seismic changes mark significant departures from past practice. ASCE 7-22 load combinations and importance factors are also quite different because of changes in the loads chapters.
This four-part webinar focuses on the seismic design provisions (Chapters 11 through 23) of ASCE 7-22 and will introduce the major changes to attendees, will explain the changes and discuss their impact.
Part 1: Chapter 11: Seismic Design Criteria
Part 2: Chapter 12: Seismic Design Buildings
Part 3: Chapter 13: Seismic Design of Nonstructural Components
Part 4: Chapter 14 – 15: Seismic Design of Nonbuilding Structures and Material Specific Requirements
Register here.
11:00 A.M. – 1:00 P.M.

PART 2 - Seismic Design Provisions of ASCE 7-22
2024-09-05 11:00 - 13:30
Part 2: Chapter 12: Seismic Design Buildings
ASCE 7-22 is adopted by the 2024 IBC, which will be published later this year. The changes from ASCE 7-16 to ASCE 7-22 are so numerous and so substantive that learning about them needs to start now. The chapter on flood loads is the only chapter that has escaped any change. There are huge changes in snow load, ice load, and tsunami load provisions. There is a whole new chapter (32) on tornado loads. Risk Category III or IV structures located in the tornado-prone region shown in a figure are required to be designed and constructed to resist the greater of the tornado loads determined in accordance with Chapter 32 or the wind loads determined in accordance with Chapters 26 through 31. The changes in Chapters 11-23 on earthquake loads and Chapters 26-31 on wind loads are many and many of the seismic changes mark significant departures from past practice. ASCE 7-22 load combinations and importance factors are also quite different because of changes in the loads chapters.
Register here.
11:00 AM – 1:30 PM PT

PART 3 - Seismic Design Provisions of ASCE 7-22
2024-09-10 11:00 - 13:30, 2024-10-01 11:00 - 13:30
Part 3: Chapter 13 – Seismic Design of Nonstructural Components
ASCE 7-22 is adopted by the 2024 IBC, which will be published later this year. The changes from ASCE 7-16 to ASCE 7-22 are so numerous and so substantive that learning about them needs to start now. The chapter on flood loads is the only chapter that has escaped any change. There are huge changes in snow load, ice load, and tsunami load provisions. There is a whole new chapter (32) on tornado loads. Risk Category III or IV structures located in the tornado-prone region shown in a figure are required to be designed and constructed to resist the greater of the tornado loads determined in accordance with Chapter 32 or the wind loads determined in accordance with Chapters 26 through 31. The changes in Chapters 11-23 on earthquake loads and Chapters 26-31 on wind loads are many and many of the seismic changes mark significant departures from past practice. ASCE 7-22 load combinations and importance factors are also quite different because of changes in the loads chapters.
Register here.
11:00 AM – 1:30 PM PT

PART 4 - Seismic Design Provisions of ASCE 7-22
2024-09-12 11:00 - 13:30, 2024-10-02 11:00 - 13:30
Part 4: Chapter 14 – 15: Seismic Design of Nonbuilding Structures and Material Specific Requirements
ASCE 7-22 is adopted by the 2024 IBC, which will be published later this year. The changes from ASCE 7-16 to ASCE 7-22 are so numerous and so substantive that learning about them needs to start now. The chapter on flood loads is the only chapter that has escaped any change. There are huge changes in snow load, ice load, and tsunami load provisions. There is a whole new chapter (32) on tornado loads. Risk Category III or IV structures located in the tornado-prone region shown in a figure are required to be designed and constructed to resist the greater of the tornado loads determined in accordance with Chapter 32 or the wind loads determined in accordance with Chapters 26 through 31. The changes in Chapters 11-23 on earthquake loads and Chapters 26-31 on wind loads are many and many of the seismic changes mark significant departures from past practice. ASCE 7-22 load combinations and importance factors are also quite different because of changes in the loads chapters.
Register here.
11:00 AM – 1:30 PM PT

PART 1 - Design and Detailing of Steel Reinforced Concrete Pile Caps
2024-09-17 11:00 - 12:00
Part 1 of the series provides an introduction to pile cap design, including loads, behavior, and general detailing requirements.
Register here.
11:00 AM – 12:00 PM PT

PART 2 - Design and Detailing of Steel Reinforced Concrete Pile Caps
2024-09-19 11:00 - 12:00
Register here.
11:00 AM – 12:00 PM PT

PART 3 - Design and Detailing of Steel Reinforced Concrete Pile Caps
2024-09-26 11:00 - 12:00
Part 3 of the series covers design and detailing requirements for pile caps subjected to combined vertical and lateral loads. Also included are design examples illustrating the proper application of the design and detailing requirements.
Register here.
11:00 AM – 12:00 PM PT

IRC for Engineers: Part 1 Scope and Limitations
2024-10-08 11:00 - 12:30
This multi-part series provides an overview of the 2021 International Residential Code (IRC) structural provisions for engineers. Focusing on wood construction, the course addresses gravity and lateral loads on residential structures. Prescriptive solutions for floor, roof, and wall systems are described to help engineers understand where engineering is required. Part 1 provides an overview of the scope and limitations of the IRC. Chapters 1 through 3 will be discussed, emphasizing areas where engineering is required.
Register here.
11:00 AM- 12:30 PM PT

IRC for Engineers: Part 2 Foundation and Framing Limits
2024-10-10 11:00 - 13:00
This multi-part series provides an overview of the 2021 International Residential Code (IRC) structural provisions for engineers. Focusing on wood construction, the course addresses gravity and lateral loads on residential structures. Prescriptive solutions for floor, roof, and wall systems are described to help engineers understand where engineering is required. Part 2 provides an overview of the foundation, framing, sheathing, and cladding limits of the IRC. Chapters 4 through 9 will be discussed, emphasizing areas where engineering is required.
Register here.
11:00 AM – 1:00 PM PT

Unique Aspect in Strength Design of Post-Tensioned Structures
2024-10-15 11:00 - 13:30
The tension force in unbonded strands that is used in the Whitney Stress Block, is determined by multiplying the section area by the fps value. Two equations are used to calculate fps and are separated by the span to depth ratio. Unlike rebar only concrete which has a constant fy value, fps is constantly changing along each span and can often switch equations within the same design strip. These creates unique numerical situations that will look odd, challenging to explain and need to be better understood by the engineer to avoid confusion in the office and on the drawings. The role and rationale behind compression reinforcement in flexural strength will also be addressed.
Register here.
11:00 AM – 1:30 PM PT

Flat Plate Voided Concrete Slab Systems
2024-10-23 11:00 - 12:00
This webinar will provide general information on the use and design of flat voided concrete slab systems in steel reinforced concrete buildings. Requirements for strength and serviceability (deflection and vibration) are included, and information is given on fire resistance and construction considerations. Case studies of some recent projects highlight some of the benefits of this slab system.
Register here.
11:00 AM – 12:00 PM PT

IRC for Engineers: Part 4 Wind Examples
2024-10-29 11:00 - 13:30
This multi-part series provides an overview of the 2021 International Residential Code (IRC) structural provisions for engineers. With a focus on wood construction, the course addresses gravity and lateral loads on residential structures. Prescriptive solutions for floor, roof, and wall systems are described to help engineers understand where engineering is required. Based on a 2-story residential wood frame structure, Part 3 provides a prescriptive solution using the IRC for a 115-mph wind speed and a prescriptive solution using the IRC-referenced Wood Frame Construction Manual for a 160-mph wind speed.
Register here.
11:00 AM – 1:30 PM PT

Design of Cold-Formed Steel Exterior Wall Connections
2024-11-07 11:00 - 13:30
Exterior cold-formed steel framing is a common system used for the “skin” of a building and is a crucial component of a building’s exterior. Structural engineers need to pay particularly close attention to this system as it is a significant factor in repair costs and recovery times after seismic and wind events, yet it is often not given the attention it deserves. This web seminar will discuss the following key design issues (and what’s often missed) for exterior cold-formed steel framing, including:
-Application of Loads
-Building Movements
-Complete Load Path
-Engineered and Proprietary Connections to the Base Structure (Including Drift Clips)
Over one-third of the presentation will be on detailed examples that will illustrate these concepts as well as common mistakes.
Register here.
11:00 AM – 1:30 PM PT

The Limited Reality of Service Stresses in Design of Post-Tensioned Concrete
2024-11-13 11:00 - 13:30
Why can’t engineers simply increase the service moment used for stress analysis by a load factor and use that for Ultimate Strength design? This approach would be valid for steel design, so what not post-tensioned concrete? The webinar will explain the limited reality and “incompleteness” of the service stress model using equivalent loads and why the service reactions, shears and moments are invalid for Ultimate Strength design. The myth of how equivalent loads makes buildings lighter will also be explained.
Register here.
11:00 AM – 1:30 PM PT

IRC for Engineers: Part 5 Essential IRC Seismic Provisions for Residential Construction
2024-11-19 11:00 - 12:30
This webinar will dive into the seismic provisions of the 2024 International Residential Code (IRC), focusing on simplified yet crucial requirements for ensuring structural safety in one- and two-family dwellings. Participants will explore key topics such as Seismic Design Categories (SDCs) for residential buildings, foundation anchorage, and shear walls, along with the proper detailing of roof diaphragms and structural connections. Special attention will be given to the seismic requirements for high-seismic-hazard (Categories D0, D1, and D2). Join us to gain practical insights on how the 2024 IRC provisions help mitigate earthquake damage and build more resilient residential structures.
Part 5 presentation will introduce seismic concepts and scoping limits and illustrate design of seismic wall bracing using an example dwelling.
Part 6 presentation will work through seismic design aspects of other elements of the example dwelling, starting at the roof and proceeding down through the foundation.
Register here.
11:00 AM – 12:30 PM PT
