Load Path, Load Combinations and Risk Categories
2025-02-04 11:00 - 13:00 (America/Chicago)
This webinar covers basic load paths and load combinations used in allowable stress design and strength design. Also discussed are risk categories assigned to buildings for load determination based on hazard to life. This webinar is based on the 2024 International Building Code® (IBC®) and the IBC-referenced 2022 ASCE/SEI 7 Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-22). The discussion of load path and load combinations is geared to new engineers, architects, and code officials. The discussion of risk categories should be of interest to all audiences.
Register here.
11:00 AM – 1:00 PM PT

Plumbing, Mechanical and Fuel Gas Code Action Committee Meeting
2025-02-04 12:00 - 14:00, 2025-02-18 12:00 - 14:00, 2025-03-04 12:00 - 14:00
Discussion of topics for PMGCAC proposals

Meeting Link:
Join the meeting now
OR
Dial in by phone
1-469-848-0134
Phone conference ID: 914 374 938#
12:00 PM – 2:00 PM EST

Hand Calculations of a Long Span Post-Tensioned Beam
2025-02-06 11:00 - 13:30
Long span garages are very common across the United States and are typically designed using relatively thin post-tensioned one-way slabs that are supported by post-tensioned beams and girders. The beams will often span in the 60-foot range and will typically require no camber due to proper application of post-tensioning. The webinar will show the step-by-step design calculations for a post-tensioned beams that are typical for long span garages while addressing the relevant code sections. Typical details that are associated with these types of structures will also be shown in conjunction with construction photographs.
Register here.
11:00 AM – 1:30 PM PT

2025 ICC Upper Great Plains Region III Educational Institute
2025-02-10 - 2025-02-14 | Minneapolis Marriott Northwest, 7025 Northland Drive North, Minneapolis, MN, 55428, United States
The Institute features 40 sessions of construction-industry related topics offered in eight tracks over five days. Check the brochure for a few select sessions to be offered virtually. Presenters are well-qualified and often well-known individuals from ICC and related areas of expertise. Everyone is invited and welcome to attend.
Register here.
Learn more here.

ICC 605 IS-MHRRC Committee Meeting
2025-02-10 13:00 - 15:00
Multi-Hazard Resiliency for Residential Construction (IS-MHRRC) Committee
The purpose of this virtual meeting is for the IS-MHRRC committee to review the ICC 605 initial draft public input agenda.
Microsoft Teams meeting
Join on your computer, mobile app or room device
Click here to join the meeting
Meeting ID: 222 290 556 345
Passcode: [REDACTED]
Or call in (audio only)
+1 469-848-0134,,404942175# United States, Dallas
Phone Conference ID: 404 942 175#
1:00 PM – 3:00 PM CST

Serviceability Design for the Practicing Engineer
2025-02-12 11:00 - 13:00
This session will provide practical information and design examples to evaluate the serviceability performance of buildings against requirements of the IBC and ASCE 7. It will provide detailed explanations and examples of applications of code provisions and standards specific to various materials, building systems, and building components. The webinar will also discuss the ways the codes currently address serviceability and how future versions of the code may be adapting serviceability requirements.
Engineers will have a better understanding of serviceability requirements in the building code and reference standards, including examples of common serviceability oversights made during design.
Register here.
11:00 AM – 1:00 PM PT

FEMA's BRIC Grant Building Code Plus Up - ICC Q&A Office Hours (Session #1)
2025-02-12 15:00 - 16:00
Wednesday, February 12, 2025 3:00 PM – 4:00 PM
Register here.

Deep Foundations - Overview and Design Example
2025-02-18 11:00 - 13:00
Deep foundation systems provide improved resistance to settlement and can safely support buildings founded on very poor soils. Deep foundations can also improve building performance by providing resistance to uplift loading. The design of deep foundations involves both the Geotechnical Engineer and the Structural Engineer. Thus, it is wise for the structural engineer to become more educated regarding deep foundation design. This presentation will provide an overview of deep foundations, including various systems in common use, such as driven precast concrete and structural steel piles, augercast piles, cast-in-drilled-hole piles, and micropiles. Mr. Harris will discuss the behavior of each system, as well as its best uses and limitations. The presentation will also include a worked example design for cast-in-place concrete piles resisting vertical and lateral loads.
Register here.
11:00 AM – 1:00 PM PT

ICCPC (Performance Code)
2025-02-19 - 2025-02-20 | 200 Massachusetts Ave NW, Penthouse, Washington, DC 20001, 200 Massachusetts Ave NW, Penthouse, Washington, DC, 20001, United States
The purpose of this meeting is to develop a modern updated International Code-based option available to those interested in an updated performance based code.
Microsoft Teams meeting
This is an in person meeting.
8:00 Am – 5:00 PM EST

IECC Commercial Consensus Committee Meeting
2025-02-19 14:00 - 16:00, 2025-03-05 14:00 - 16:00, 2025-03-19 14:00 - 16:00
Microsoft Teams
Join the meeting now
Meeting ID: 213 715 837 318
Passcode: [REDACTED]
Dial in by phone
+1 469-848-0134,,739591542# United States, Seagoville
Phone conference ID: 739 591 542#
2:00 PM – 4:00 PM EST

Frame of Reference: Steel Moment Frames Explained
2025-02-20 11:00 - 13:00
This web seminar will discuss the structural design and detailing requirements for ordinary and special steel moment frames specified under the provisions of the 2018 IBC, ASCE 7-16, AISC 360-16, and AISC 341. Intermediate steel moment frames will only be addressed by explaining why they are not commonly used
Register here.
11:00 AM – 1:00 PM PT

EduCODE 2025
2025-02-24 - 2025-02-28 | 4500 West Tropicana Avenue • Las Vegas, NV 89103, 4500 West Tropicana Avenue, Las Vegas, NV, 89103, United States
On behalf of the Southern Nevada Chapter of the International Code Council, we welcome you to our 28th year of providing outstanding educational programs. EduCODE is designed to provide the premier educational training in the country along with several networking opportunities to provide the best overall experience. EduCODE provides nationally acclaimed instructors, daytime and evening networking opportunities through the week, industry representatives showcasing their latest products, technology and services at our daily expo, and a staff that will provide outstanding customer service to make your visit beneficial, fun, and rewarding.
Where can you choose from over 150 classes both in person and online, each ICC Preferred Provider certified? Where can you brainstorm with instructors, building, fire and code enforcement professionals, students and staff, and have fun while learning? EduCODE 2025: that’s where! Whether you attend for one day or for the entire week, virtually or in person, we are certain that you will have an exceptional experience that you will never forget.
Live at the Orleans Hotel and Virtual.
Register here.
Learn more here.

2025 ICC Code Correlation Committee (CCC) Meeting
2025-02-24 11:00 - 13:00
Virtual – Group B Editorial Review and Group A Correlation – AS NEEDED
Join the meeting now
Meeting ID: 241 870 927 562
Passcode: [REDACTED]
Dial in by phone
+1 469-848-0134,,261784898# United States, Seagoville
Phone conference ID: 261 784 898#
11:00 AM – 1:00 PM EST

IECC Residential Consensus Committee Meeting
2025-02-25 14:00 - 17:00, 2025-03-11 14:00 - 17:00
Microsoft Teams
Join the meeting now
Meeting ID: 292 549 521 570
Passcode: [REDACTED]
Dial in by phone
+1 469-848-0134,,713350603# United States, Seagoville
Phone conference ID: 713 350 603#
2:00 PM – 5:00 PM EDT

Global Membership Council, 1st Quarter Meeting
2025-02-25 15:00 - 16:30
Register here.

Fire Code Action Committee (FCAC) Meeting
2025-02-26 13:00
Microsoft Teams
Join the meeting now
Meeting ID: 278 261 619 559
Passcode: [REDACTED]

2022 Changes to AISC 341 and 360
2025-03-05 11:00 - 13:00
The 2022 editions of AISC Specification for Structural Steel Buildings (ANSI/AISC 360-22) and the Seismic Provisions for Structural Steel Buildings (ANSI/AISC 341-22) represent the latest in structural steel design and construction. This presentation will cover the latest updates, including the exciting addition of concrete-filled coupled composite plate shear walls to both standards. Other major additions to the Specification include clarification on what to include in structural design documents; a new appendix on filled high-strength composite members; and a major expansion of the appendix on structural design for fire conditions. The Seismic Provisions now include an appendix on nonlinear response history analysis. These and many more developments will be discussed to orient users on how to start incorporating these latest standards into their practice.
Register here.
11:00 AM – 1:00 PM PT

Water Matters: The Windsor Declaration and Global Solutions for Water Scarcity (Learn Live)
2025-03-05 16:00
Join Tom Reynolds (Bathroom Manufacturers Association) and Tom Roberts (International Codes Council) for an engaging webinar during World Water Awareness Month, spotlighting the transformative Windsor Declaration. This global initiative unites bathroom manufacturers, trade associations, and certification bodies to address the urgent challenge of water scarcity. Discover how the Declaration’s commitments to water efficiency and sustainable innovation are driving systemic change and learn how you can contribute to this bold vision for a more water-resilient future.
Register here.

PART 1: 2021 IEBC - Introduction and Prescriptive Path
2025-03-11 11:00 - 13:00
Part 1 of this course will provide an overall introduction to the layout of the IEBC as well as a discussion of its importance. The portions of the code that apply to all projects will be discussed. The IEBC provides multiple paths for compliance, and Part 1 of this presentation will focus on the “Prescriptive“ path.
Part 2 will focus on the “Work Area“ and “Performance“ paths of compliance. Examples will be provided for each. The last portion of the class will include example projects that will be looked at from a prescriptive, work area, and performance approach so that attendees will have a good feel for the limitations and benefits of each method.
Register here.
11:00 AM – 1:00 PM PT

Sustainability, Energy, & High Performing Buildings Code Action Committee Meeting
2025-03-12 14:00 - 15:30
Microsoft Teams meeting
Join on your computer, mobile app or room device
Click here to join the meeting
Meeting ID: 288 149 167 277
Passcode: [REDACTED]
Or call in (audio only)
+1 469-848-0134,,518188610# United States, Dallas
Phone Conference ID: 518 188 610#
2:00 PM – 3:00 PM EST

PART 2: 2021 IEBC - The Work Area and Performance Paths
2025-03-13 11:00 - 13:00
Part 2 will focus on the “Work Area“ and “Performance“ paths of compliance. Examples will be provided for each. The last portion of the class will include example projects that will be looked at from a prescriptive, work area, and performance approach so that attendees will have a good feel for the limitations and benefits of each method.
Register here.
11:00 AM – 1:00 PM PT

How Will Model Codes Need to Change to Promote Water Reuse (Learn Live)
2025-03-13 13:00
Today’s national model codes contain provisions that encourage the conservation of water through the administration of the codes but are limited in the content that promotes the reuse of water. This presentation addresses what water reuse provisions currently exist as well as what model code provisions will need to be modified to break down the barriers that exist in order to make codes a stronger promoter for the reuse of water.
Register here.

Real World Examples to Provide Fire Rated Assemblies Using Approved Methods
2025-03-18 11:00 - 13:00
The presentation will cover basic examples for providing fire rated assemblies such as walls, columns, beams and floors/roofs, for new building construction. The examples are for demonstrating compliance with the fire resistance requirements of the 2021 International Building Code. Course material presented will cover using code recognized technical resources and methods to document compliance.
LEARNING OBJECTIVES:
Participants will be given instruction on the use of the approved methods recognized in Chapter 7 of the IBC for meeting the required fire resistances of the building elements.
Participants will gain a working knowledge of the technical resources available to document expected fire resistance of building elements.
Participants will be presented real world examples to determine the fire resistance requirements for key building elements including the structural frame, floors, roofs and exterior walls using the approved methods.
Register here.
11:00 AM – 1:00 PM PT

CCC Meeting
2025-03-19 12:00
Virtual – Group B Editorial Review and Group A Correlation – Cont
Microsoft Teams
Join the meeting now
Meeting ID: 275 137 400 555
Passcode: [REDACTED]
Dial in by phone
+1 469-848-0134,,83908971# United States, Seagoville
Find a local number
Phone conference ID: 839 089 71#
12:00 PM EST

ICCPC (Performance Code)
2025-03-20 10:00 - 11:30
The purpose of this meeting is to develop a modern updated International Code-based option available to those interested in an updated performance based code.
Microsoft Teams meeting
Join on your computer, mobile app or room device
Click here to join the meeting
Meeting ID: 259 268 394 168
Passcode: [REDACTED]
Download Teams | Join on the web
Learn More | Meeting options

10:00 Am – 11:30 AM CT
